damo Messages: 180 Registered: August 2003 Location: stafford
(4) WSS Racer
just binned it today
got up this morning and had a good look at the weather and decided it was not as bad as the weather men said it would be "they had been a bit over the top lately" so off i went all ok untill i got within 6 mile of work the snow just hammered down, so i decided to carry on "very slow" all ok but 600meters from the unit and down i went "about 10 to 12 mph" the rear wheel just slid around and that was that
had a look after and their was a recessed drain hole which started the rear slide
thankfully the R&G crash bungs did their job very well and saved all the top part, the only damage is a scrape to the rear brake lever, a scrape to the exhausts mount and worst of all the bottom belly pan is worn through "mounts may hav been nudged a bit too will check when i strip her down"
to add insult to injury i binned on the way home too
damo Messages: 180 Registered: August 2003 Location: stafford
(4) WSS Racer
hi,
yeh i'm fine just a sore leg and a soon to be sore wallet
will just smooth off the can and foot peg but will need to get a new belly pan & crash bung.
i must say i am impresswed with the R&G bungs, did a very good job of saving the plastic, i hade a pair of magic mushrooms fitted to my last blade and they did not even touch the ground when i binned that one! "oh i do crash too much by the way, only two propers one and this slow speed one in six years of rideing"
ohh yes Ted is a fecking genius, where's that DRINK
damo Messages: 180 Registered: August 2003 Location: stafford
(4) WSS Racer
yeh it a 929 RRY, black & silver
it was a perfect example! got a few scratches now
will have a look at the David Silver site,
i live close to D&K and will look but from experance and friends accounts, D&K are not a good dealer. i,ve had two bike from them now, very unlikley i would have a third.
ekbiker Messages: 1044 Registered: June 2003 Location: England, UK
(8) 250 GP Racer
Would you mind saying what it was about DK that you wouldn't like to go back? I'm guessing that they are a large numbers dealer so that they might not care so much about customers on an individual basis. It's possible that they think there is another customer along in a minute so just step aside. Could it be something like that?
bladebandit Messages: 1084 Registered: July 2003 Location: cannock, staffs
(8) 250 GP Racer
ive just recently had a spill and i found www.thefirebladeshop.com very helpfull but i had my panel repaired so maybe you could look at that for an idea i used a company called pmv 01274830777 or 07752611868 (ian) he did a great job
regards
chris
damo Messages: 180 Registered: August 2003 Location: stafford
(4) WSS Racer
thanks for the info guy's
all i need is a R/H side belly pan in black, but i will reep the dameged one of untill it's put up for sale.
in regards to the D&K thing, i,ve had two bikes from them and both times i called to check it was ready for collection and advised all is ok, 35 mile drive and hey presto it's not done
two of my m8's have had this too, very bad after sales service
in years past they had shit service but very cheap prices os folks just put up with for the saving but now they still have crap servive and the prices are high too, so they have very little to offer.